| TwinCitiesRailfan.com http://www.twincitiesrailfan.com/forums/ |
|
| BNSF 9647 http://www.twincitiesrailfan.com/forums/viewtopic.php?f=1&t=388 |
Page 1 of 2 |
| Author: | railtalk [ Tue Jul 11, 2006 2:52 pm ] |
| Post subject: | BNSF 9647 |
BNSF 9647, the "barfbonnet" or executive test paint scheme out of Illinois yesterday on the M-NSINTW. Don't know which way its heading when it gets to Northtown. Watch and listen trackside... -MN Chris |
|
| Author: | busyemt [ Tue Jul 11, 2006 4:07 pm ] |
| Post subject: | |
I saw that on RP.net this am. It is our third wedding aniversary, no rail fanning today. Good luck to those who look for it. |
|
| Author: | railtalk [ Tue Jul 11, 2006 4:43 pm ] |
| Post subject: | |
Congrats Aaron. |
|
| Author: | MilwaukeeroadMatt [ Tue Jul 11, 2006 9:15 pm ] |
| Post subject: | |
Way to go Aaron, hope you have a great day with the wife. |
|
| Author: | brahamfireman [ Wed Jul 12, 2006 8:46 pm ] |
| Post subject: | |
it went up to superior about a month ago, I saw it but it was too dark for a pic, and the camera died. it was fairly clean then, so if anyone gets any pics they shouldn't be to shabby |
|
| Author: | MilwaukeeroadMatt [ Sun Jan 18, 2009 10:48 pm ] |
| Post subject: | Re: BNSF 9647 |
I know this thread is two yeas old but no sense in starting a new one. The often saught after 9647 made its way through the cities this morning on what I think was a reroute coal load as the reporting marks on the hoppers I have necer seen here (IESX & LNTX) anyway here is the shot second out and facing the "wong way" but heck I did not care. |
|
| Author: | john [ Mon Jan 19, 2009 1:55 pm ] |
| Post subject: | Re: BNSF 9647 |
Nice grab on that unique unit. Anyone know why it seems that nearly all of the MACs have those blemishes on the paint in the same general location on the hoods? Is it from something over heating? I thought it might be the dynamic brake but isn't that located closer to the cab? |
|
| Author: | Mike B. [ Mon Jan 19, 2009 2:57 pm ] |
| Post subject: | Re: BNSF 9647 |
That was a Columbia coal train. As far as the burn marks go, I'd think it was the turbo but that should be lower in the engine...but heat does rise. I chased a coal train a few weeks ago that had three 70MACs. The leader had some peeling paint in that location and another had some somewhat severe burn marks. I got some good shots, but those 'issues' sure didn't help things. |
|
| Author: | brahamfireman [ Mon Jan 19, 2009 6:48 pm ] |
| Post subject: | Re: BNSF 9647 |
the mufflers are right behind there, plus those engines are normaly on heavily loaded coal trains makes for alot of exhaust heat in a turbo application. things get hot and burn off. when I shot that unit back in July the engineers side had been repainted from the previously burned off paint. |
|
| Author: | Mike B. [ Thu Jun 04, 2009 7:02 pm ] |
| Post subject: | Re: BNSF 9647 |
The 9647 is on the CP River Sub. now trailing on a Columbia load. |
|
| Author: | 8years2Go [ Fri Jun 05, 2009 7:19 pm ] |
| Post subject: | Re: BNSF 9647 |
It's sitting at Daytons Bluff on a E-SPCCDM. It's estimated to go at 0500 on June 6th. |
|
| Author: | Mike B. [ Sat Jun 06, 2009 9:36 am ] |
| Post subject: | Re: BNSF 9647 |
Well anyone can go get it now if you're willing to drive a bit in the rain. The 9647 is currently leading 883, but it's sitting in the Homer siding dead. |
|
| Author: | Mike B. [ Sat Jun 06, 2009 10:26 am ] |
| Post subject: | Re: BNSF 9647 |
Nevermind, it's already back on the move towards St. Paul. |
|
| Author: | 8years2Go [ Mon Jun 08, 2009 8:27 pm ] |
| Post subject: | Re: BNSF 9647 |
| Author: | brahamfireman [ Mon Jun 08, 2009 8:56 pm ] |
| Post subject: | Re: BNSF 9647 |
Sweet. keep that thing on the MN bound coal trains, I love that unit. |
|
| Page 1 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|