| TwinCitiesRailfan.com http://www.twincitiesrailfan.com/forums/ |
|
| mystery piece of equip. http://www.twincitiesrailfan.com/forums/viewtopic.php?f=35&t=1131 |
Page 1 of 1 |
| Author: | brahamfireman [ Sat Sep 29, 2007 6:24 pm ] |
| Post subject: | mystery piece of equip. |
http://rides.webshots.com/photo/2101308 ... 7554tlTjwV I'll let you guys look at it and figure out what it is, and what the loco pulling it is. reporting marks were GCFX 3085, sorry MRM I told you the wrong number on the phone, the disp. and the cond. were both having problems remembering the letters for the warrant, said it was heading to Brainered restricted to 30 mph, 8 axles work platform on the rear. looked like a MOW spike puller but I am pretty sure it had Loram name and numbers on it. 
|
|
| Author: | Mike B. [ Sat Sep 29, 2007 9:11 pm ] |
| Post subject: | |
GCFX 3085 is a SD40. |
|
| Author: | RS27 [ Sat Sep 29, 2007 10:14 pm ] |
| Post subject: | |
Looks to me like a production tamper - a bit hard to tell from that shot. I'd have to check - did you look for it on Plasser's site? Looks like one of their products... |
|
| Author: | WisconsinCentral [ Sun Sep 30, 2007 8:04 am ] |
| Post subject: | |
I'll add to Mikes post. GCFX 3085 started life on the CP as 5518 in 1966. Now classified as an SD40-2. http://rrpicturearchives.net/showPicture.aspx?id=34822 Alec |
|
| Author: | busyemt [ Sun Sep 30, 2007 9:39 am ] |
| Post subject: | |
| Author: | brahamfireman [ Sun Sep 30, 2007 2:05 pm ] |
| Post subject: | |
| Author: | BN9244 [ Sun Sep 30, 2007 3:36 pm ] |
| Post subject: | |
From Plasser American's website: "The latest development in continuous action switch/production track tamping, surfacing and lining. The Unimat 09/4S series are all in one machines – continuous action production tamping, double split-head switch and interlocking tamping, and 50 mph travel capability alone or in MDZ consist. The 09/4S is available as a single tie tamper (Unimat 09-16/4S) or as a dual tie tamper (Unimat 09-32/4S). Major features are: *Operator’s cabin, travel cabins, power unit, main hydraulic components and electronic systems are mounted on the continuously moving main frame. *Satellite mounted tie tamping units and rail clamp for high speed, continuous action production tamping. *Double split, traversable, single tie tamping units for complete switch tamping. Combination rail clamp for switch and production work. *Unique three point Integrated Auxiliary Turn-out Lifting System for switch and interlocking work. *Four rail tamping capability in switches and cross-overs. *AGGS – Automatic Geometry Guidance System for precise track geometry. Allows automatic “best fit” geometry corrections or manual corrections as desired. *Shoulder compaction unit for increased lateral stability directly after tamping. *1000 gallon fuel tank for increased production use. *Separate cab for switch and interlocking work allows better visibility and direct control over the track lifting operation. *Sound insulated, climate controlled cabins for operator comfort and efficiency. *High strength frame design allows end-of-train movement over long distances." |
|
| Author: | Mike B. [ Sun Sep 30, 2007 5:32 pm ] |
| Post subject: | |
The BNSF classifies the GCFX 3085 as a SD40, not SD40-2. From the way you worded it, I thought you were sincerely asking what kind of engine it was. My bad...I guess.
|
|
| Author: | brahamfireman [ Sun Sep 30, 2007 9:45 pm ] |
| Post subject: | |
yea I can see how it came off as that. my bad also. I was again wondering on the GCFX, never heard of them before. Aaron, good info, I wonder why they said they were restricted to 30MPH??? |
|
| Author: | BN9244 [ Mon Oct 01, 2007 5:03 pm ] |
| Post subject: | |
| Author: | Chris [ Mon Oct 01, 2007 9:54 pm ] |
| Post subject: | On the fly,,,, |
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|